Monthly Archives: March 2017

3 Simple Hacks to Establish a Successful Business Practice in a New Community

Two businesswomen shaking handsAs your business grows, so does the need to expand and cover more areas. In some instances, that might mean venturing into small yet profitable communities. As the new kid on the block, you need to make every effort to win over such close-knit communities. One wrong move could mean the difference between runaway success and abject failure.

Pick a prime location

If your target community lives in a small town, you need to set up shop in a central location. Ideally, you should pick a location that gives you high visibility and access. Make every effort to get the community notice your business.

Make use of legible and well-lit signs and be sure to place them in a highly visible location. With the help of the best signage makers, Signs n Stuff and other experts say that you can advertise services with an assortment. They can also help you to brand your premises with your theme colours for ease of recognition.

Be part of the community

Maintaining a good relationship with the community is important for the success of your business. Make an effort to be part of them and make charitable donations in the name of your business, as these helps to boost your reputation. Prospective customers begin to associate your names with the good things that you are doing for the community, endearing you to them.

Join the local chamber of commerce

Other than raising your credibility, such a move enables you to create a useful business network with other traders in the region. It increases your chances of forming profitable partnerships that can help grow your business. Cross promotions and co-marketing agreements are exceptional ways to boost your sales and business presence.

Establishing a business in a new territory can prove tricky but not entirely impossible. You only need to build brand awareness and endear your brand name to the local community to gain acceptance.

Three Lifestyle Habits to Quit for better Oral Health

Dentist checking a woman's mouthYour smile is one of the most important features of your face: you use it to convey emotions, such as sadness or joy, for instance. It is important, then, that you maintain the beauty of your smile since it plays a huge role in allowing you to express your emotions properly. The simplest of habits can, however, affect your pearly whites and the quality of your smile.

The smallest lifestyle habits can cause significant damage down the road if we don’t pay careful attention to the things we consume. Smile Spa, a dental practice that offers general, cosmetic and restorative dental treatments, believes a good way to retain the beauty of your smile is to quit some lifestyle habits that could be harming the natural beauty of your pearly whites. 

Smoking and Vaping

Long-term smoking can lead to a host of dental problems: bad breath, heavily stained teeth and, at worst, oral cancer. While some smokers may turn to e-cigarettes as an alternative to the standard cigarette, vaping could be just as bad due to the different smoke flavours that could damage gum tissue and mouth cells. For a healthier smile, avoid picking up the habit of any nicotine-laced delivery system.

Drinking Coffee and Wine

While a caffeinated drink can give you an extra boost, the burst of energy offered by coffee or tea can stain your teeth and affect the beauty of your smile. Sometimes, the dark liquids can seep into tiny cracks and pits in tooth enamel and stay stuck there as well, leading to a dark and dingy smile.

Snacking through the Day

Let’s face it — everybody enjoys a snack now and then. Snacking throughout the day lowers the PH level in the mouth, however, and this makes a person’s mouth a place where bacteria can thrive. Sipping soda throughout the day, for instance, allows sugar-loving bacteria to break down tooth enamel. Instead of snacking all day, engage in full, heavy meals to avoid making your mouth a haven for bacteria.

Maintain the beauty of your smile by quitting these three lifestyle habits today — your teeth will thank you for it. A healthier smile, after all, is part of the package that leads to a higher quality of life. 

Maximising Storage and Investment: Smart Uses for High-Density Cabinets

shelves in a storage facility
High-density cabinets do wonders in the parts and service industry, which is a growing trade in Australia. They require less space and make inventory easier, after all. Furthermore, they reduce time, labour and resource costs during transactions, increasing business profitability.

There are more ways you can optimise the use of your high-density cabinets. From storing parts according to their size to cleverly positioning your fastest-selling products, here are some smart ways to maximise your storage space and your investment.

Prioritising the Fastest-Selling Items

Store the products that sell the most near your counter. Doing so will reduce employee travel time and the need for additional manpower during retrieval. If you’re not sure which items sell the fastest, refer to your business management system in the past year. You’ll be able to track your best-sellers on it. Additionally, consider duplicating your fastest-selling items if you have more than one walk-up position.

Storing by Item Type

It’s visually easier to locate items if you store them with similar items. So, organise your products according to manufacturers of similar parts. By keeping them in one area, you can make cross referencing faster. Going with such a method will make it easier to cater to a customer if they come in for an inquiry.

Using an Alphanumeric System

If you have a sizable inventory, arrange it alphanumerically to make it easier to locate each item. Aside from the cabinet’s position, moreover, you can further categorise items by drawers, rows and positions. For example, H7 headlight bulbs would be in Cabinet C, Drawer 2, position 2. An alphanumeric system makes inventory faster.

Organising by Size

Don’t waste even the smallest of spaces in your high-density cabinets. So keep items the size of a five-inch cube or smaller in your storage space and store your bulkier items on shelves.

High-density cabinets are ideal for the parts and service industry. They provide smart storage solutions that help businesses lessen their labour time and, as a result, increase profits. You can further optimise them with clever organising strategies.

Know Your Magnetic Drill: The Types and Categories to Familiarise With

power toolsIn the fabrication and construction business, you use a magnetic drill for when you need to drill holes onto steel structures. An experienced fabricator or construction contractor will already be familiar with its different functions and safety features. As a new fabricator or contractor, however, you still have a lot to learn about the tool.

Here is a short guide on the types of magnetic drills to help you get started.

Drill Types Based on the Power Source

Construction equipment providers like offer many types of magnetic drills: electric, pneumatic and hydraulic, to name a few.

First, the electric magnetic drill is a commonly used tool in construction sites. It is light and compact and it comes in various sizes. Second, the pneumatic drill is best for wet or hazardous environments. Finally, the hydraulic drill works best during underwater drilling work.

Categories Based on the Features

In more specific detail, you can categorise magnetic drills based on their features.

The manual-feed, portable magnetic drill with annular cutters is a standard tool; it can take the brunt of many drilling tasks. You can control the movement of the cutter, arbour and motor by using a three-handle feed with a slide and gib system.

The variable-speed, quill-feed drill, however, can fit in confined spaces that standard drills may not be able to reach. The quill-feed feature helps create smooth feeds quickly throughout the cut. The variable-speed feature, on the other hand, works great with carbide cutters and increases the life of the tool.

For even more confined spaces of less than 8 inches in height, you can use a 90-degree, low-profile drill. It is a lightweight and compact tool with single feed handles. Furthermore, it packs a wide range of cutter sizes. So, you can operate it in spaces that other types of drills might not be able to.

Other feature-based categories include power-feed drills, swivel-based drills, and permanent-magnet drills. Expand your knowledge on fabrication and construction by researching the tools you use.

Observe These Safety Measures on Elevated Platforms

Construction worker with safety gearElevated work platforms or aerial platforms allow you to access hard-to-reach and out-of-the way places in the work area. As with every piece of mechanical equipment, platforms require you to observe proper safety measures to ensure fast, efficient, and trouble-free operations.

If you are working with a platform for hire company in Staffordshire, they should be able to help you enforce the following safety rules when using their equipment.

1. Get trained.

Read and understand the manufacturer’s manual before going onboard. You need to become familiar with all the controls and devices on the platform.

2. Inspect the equipment.

Test the equipment before going full steam ahead. If there are certain functions that are not working, make sure they are thoroughly addressed before proceeding.

3. Check for hazards.

Look for hazards in the terrain, such as holes, bumps, ditches, un-tamped earth fills, and overhead obstructions such as hanging power lines. Create a plan for going around them during operation.

4. Use the proper safety gear.

Wear the appropriate safety gear before operating the machine. This includes a full-body harness and lanyard or a retraining lifeline that prevents you from being ejected from the platform.

5. Only elevate the platform on level ground.

Never elevate the platform on an incline. The equipment will sound the alarm if it detects it is on sloping ground. If the alarm sounds, lower the platform immediately and move the platform to level ground.

6. Stay a safe distance away from power lines.

Never go within 4 metres of power lines, unless you havea  formal written consent from the power company to work within this distance. For maximum safety, always treat all power lines, wires, and cables as live.  

Workplace safety when using elevated platforms is a crucial element of conducting good business. By ensuring your employees are safe, you speed up operations, boost worker morale, and improve productivity, all of which benefit your bottom line in the long run.

The Different Kinds of Radiation Exposure

Man Holding Radioactive MaterialReactor accidents usually cause human radiation in three different ways: internal contamination, external contamination, and partial or total body exposure because of nearness to a source of radiation. These three kinds can have an impact on someone involved in a radiation accident, which is why Lawrence Livermore National Laboratory usually helps these patients.

Total or Partial Body Exposure

This happens when an outside element gets exposed to the body either deep into the internal organs or onto the skin. The depth will mainly depend on the energy of the radiation itself. For instance, beta radiation can only move to a short distance in the tissue, but it will still rely on the amount of energy it gives off. This can cause a weighty dose to the skin. On the other hand, high-energy gamma radiation can pierce through deeply.

People who have experienced partial or total body exposure without contamination aren’t radioactive, so they won’t pose a threat of exposure to their caregivers.

External Contamination

External contamination happens when the fission products land on a certain person, leading to exposure of their internal organs or skin. To reduce the dangers of external contamination, residents who live near a reactor accident site have to stay indoors for a certain amount of time.

Internal Contamination

Internal contamination happens when a person inhales or ingests fission products. It can also come into contact with the body through open wounds. Massive populations surrounding a reactor accident can be exposed to radiation through this primary mechanism. After the Chernobyl accident, around five million people in the area could have excess radiation exposure. Reactor accidents can discharge an assortment of radioisotopes into the atmosphere.

Nuclear plant workers lead dangerous lives, but knowing the different types of radiation exposure may prepare them for unexpected accidents.

DIY Pipe Shelf: Construction Hacks You Need to Know

Room with a ShelfShelves play an important part in one’s home. Not only do they help organize your books, they are also essential in organizing other things while adding an aesthetic touch to your place.

Buying shelves in your local store are easy. But for people who are on a budget, or those who simply want to unleash their creative sides, going for pipe shelves are becoming a thing. Aside from being budget-friendly, they are easy to make and is as durable as store bought ones.

1. Have a plan

Browse through the web to have an idea of how you want your shelf to be built. Aside from having an idea on how it would look it, it is essential to get the right measurements before you start your project.

2. Tools and materials

Have the right tools and materials. Aside from the pipe itself, the boards, pipe press tools, screws, bolts, and paints are must-haves in every project.

3. Work with the boards

It is important to work on your boards accurately. Aside from having the right measurements, do not forget to sand the boards before painting or attaching them to the wall.

4. Assemble the pipes

Assembling the pipes is more challenging than fixing the boards. With the right materials at hand, it is easy to cut, bend, and attach steel pipes together. You can screw the pipes by hand. It doesn’t need to be every night, as long as it is secure then it would be able to hold up.

5. Put together

Screw the flanges carefully to the wall and make sure they are leveled together. Install the boards and you are done.

Pipe shelves are not only easy to make. They are also aesthetically flexible. You can choose any colour that matches your home’s theme and use it for your boards or pipes itself. If you are feeling a creative, you can use other surfaces in lieu of boards to give your shelf a different finish.

6 Things to Consider For a Kitchen Benchtop

White Kitchen BenchtopAre you looking for the perfect benchtop material in New Zealand? With so many choices for your kitchen, it can be a daunting task.  Here are 6 things you must consider before making your buying decision.

1. Hardness

Hardness can affect factors such as the rate of wear and tear and the strength of the surface. Hard surfaces are also less likely to chip or break. You would want to consider hardness if you constantly place heavier items such as big coffee makers on your benchtop. Prestige Bench Top Limited says that different materials vary in hardness. For example, an acrylic benchtop is not as hard as a quartz kitchen benchtop.

2. Resistance to water, heat, and stains

This is an important factor consider especially for a kitchen benchtop. The kitchen area is an active place that includes plashing water, heat from cooking vessels, and spillage of food and drink.  Materials such as wood and marble require special treatment to prevent staining and water damage.  Quartz and granite, on the other hand, are more resistant to water and heat and are less likely to stain.

3. Durability

With some benchtops, you may experience cracking, scratching and notable degeneration sometimes in less than five years of use. Durability is an important factor to consider if you want something that will last for a long time. For example, a composite stone benchtop will last you much longer than a laminated benchtop.

4. Aesthetics

This is definitely on top for anyone looking for a kitchen benchtop.  For some people, aesthetics is more important than anything else. Luckily, you can get great decor and durability at the same time. Most natural or engineered stone products offer great aesthetics and give you many years of service.

5. Maintenance

For some materials, all you need is to wipe it with a damp cloth to maintain while others require more than that.  Concrete and natural stone require regular resealing for protection. Care must also be taken to prevent spilling acidic substances to prevent damage. On the other hand, surfaces such as stainless steel and laminate are low maintenance.

6. Cost

If you are budget conscious, you need to consider the cost involved in the purchase and installation of a benchtop.  For example, a granite or marble top will cost you much more than a laminate benchtop.

Remember that each material has its own strengths and weaknesses. It is important to ponder on your needs and expectations before making a purchase decision.

DIY Home Painting: 3 Painting Rules You Must NOT Break

Man Painting a WallFor a DIY enthusiast like you, painting your home is something that you wouldn’t want to tackle again for several years. That said, below are the top three home painting rules you should never, ever break.

1. Never skimp on painting materials.

Cheaper paints require more coats than more expensive superior quality paints and are more durable. Subpar painting tools won’t give you the most bang for your buck since they would probably be damaged while your painting. With this in mind, invest in high-quality paints and consider renting painting tools if you don’t have the budget to purchase the more costly versions.

2. Always prep before painting.

Ignoring this critical painting rule might lead to a devastating finish for your project, even if you use the best quality tools and paints. A thorough cleaning would aid your topcoat in adhering to the surface. If you spot some localized issues like old peeling paint, holes, cracks, or flaking, you must repair them prior to painting. You would also have to decide whether you should prime the surface or not. In general, a house painting specialist in Westchester County, NY like Pallette Pro Painting and Renovations recommends that you must use a primer if you’re going to:

  • Paint a repaired/patched or new drywall
  • Paint light paint on a dark surface
  • Paint latex paint over an oil-based paint
  • Block an odor or stain

3. Paint during ideal weather conditions.

The most appropriate temperature for painting the exterior of your home is between 50o and 85o Fahrenheit. Painting during muggy or hot weather would dry the topcoat faster, but could also dry it too fast that it results in clumping, noticeable brush marks, blistering, and cracking. Painting during windy, rainy, or cold weather, on the other hand, might prevent the paint from properly sticking to the surface and lead to paint bubbles.

You could paint your home all you want, but you must never break these painting rules, lest you want to start all over again. Also, keep in mind that you should never tackle your home’s painting job on your own if you lack the proper skills and tools to do so to avoid issues later on—best leave the job to the pros.

Abrasive Blasting Work Safety Measures

Safety SignOne of the most common methods in construction is abrasive blasting. It is the use
of grit sand particles with compressed air. These particles are then used to clean metal objects like steel. It can also be used to provide texture to poured concrete. Different types of materials can be used in abrasive blasting; this includes silica sands, coal slag, garnet sand, nickel slag and crushed beads among others.

Because it involves a broad range of materials, Safe Work Australia laid down safety guidelines for workers to observe. Here are some of the guidelines for handling abrasive blasting:

1. Identifying hazards

Hazard identification is the first step in controlling risks in the workplace. This can be done by through thorough observation. Simply walking around the area, inspecting the machine itself, reading the labels and communicating with manufacturers and workers involved can help one identify potential hazards. Hazards can be airborne contaminants, hazardous chemicals, noise and the use of the abrasive machine itself.

2. Risk assessment

After observation, risk assessment should be made. This includes identifying which workers are at risk and determining the potential source of risk. One should not forget to check on airborne contaminants when working on an abrasive blasting area, according to Syntech. Doing so can help reduce health hazards.

3. Risk control

There are three ways to effectively manage risks in the workplace. This includes substitution, isolation and implementing engineering controls. Substituting one product to another can help reduce risks brought about by airborne chemicals. Conducting the process in an isolated area can contribute to reducing risks.

4. Control measures

These control measures should not only be done but should also be continually reviewed to know whether they are effective or not. People in the workplace should also be aware of such policies to ensure its effective implementation.

There would always be risks involved in such line of work. However, proper planning and preparation can help minimise such unfortunate instances.